Loading ...
Loading ...
Loading ...
13
Using the Oven Control (cont'd)
Do I need to prepare?
To get the best results from the
self-clean cycle, follow these steps:
• Clean excess spills from oven
interior.
• Remove birds or animals
susceptible to smoke or other
fumes from the room or adjoining
room.
• Make sure oven light cover is
properly in place. Do not use
cleaning cycle if it is not.
• Remove oven racks and all
cooking utensils from oven.
• Remove items from range top and
backguard. These areas can become
hot during self-cleaning cycle.
• The range vents from the right rear
area of control panel. Make sure
this is unobstructed by removing
all items from range top.
WARNING
!
To avoid risk of personal injury,
do not touch oven vents,
or area around vents, during
self-cleaning. These areas can
become hot enough to cause
burns.
CAUTION
!
To avoid fire or smoke damage,
• remove any flammable materials
from storage drawer. Items like
plastic containers and paper
manuals can melt or burn.
• clean excess spills before
starting Self Clean.
Self-cleaning
Self-clean feature uses high oven temperature to clean oven interior.
1. Prepare oven for self-cleaning
(see below right).
2. With door closed, move oven
door lever, located above oven
door, to the right. This moves
the lever to the LOCKED
position.
3. Turn oven temperature knob
to CLEAN position.
• If oven temperature knob is
set before oven door lever is
moved, LOCKED light flashes. Move oven door lever to locked
position.
• Once cycle begins, both LOCKED and OVEN indicator lights will
be on and remain on until the end of the cycle.
• At the end of self-clean cycle, OVEN and LOCKED indicator
lights flash. This indicates the oven is cool enough for the door to
be unlocked. Turn temperature knob to OFF position and move
oven door lever to unlocked position. DO NOT attempt to unlock
door before OVEN and LOCKED indicator lights flash.
OFF
200
WM
250
300
350
400
450
500
550
CLEAN
BROIL
PREHEATED
LOCKED
OVEN
How Long Should the
Self-Clean Cycle Last?
The self-slean cycle lasts a total of
four hours with a 1/2 hour cool
down. After the self-clean cycle
ends, the oven must cool before the
oven door can be opened. When the
LOCKED light flashes you can
safely open the oven door. DO NOT
force the oven door open while the
LOCKED light shows. The oven
door lock can be damaged.
Interrupt Self-Clean Cycle
To stop a self-clean cycle that has
already started follow these steps. If the
interruption occurs mid cycle, the oven
will remain locked, even though the
cycle has been stopped, until oven
cools.
1. Turn oven temperature knob to OFF
position.
2. When oven has cooled to a safe
temperature, LOCKED light flashes.
Door will unlock and can be
opened. DO NOT force door lock
lever. This can cause damage to the
latch.
Loading ...
Loading ...
Loading ...