Loading ...
Loading ...
Loading ...
11
Using the Oven Control
8888
HRS
+
HRS
-
-
MINS
+
MINS
TIMER
CLOCK
SURFACE
OFF
200
WM
250
300
350
400
450
500
550
CLEAN
BROIL
PREHEATED
LOCKED
OVEN
CONVECTION
STANDARD
Flashing Display
When power is connected or
interrupted, oven display flashes.
Press CLOCK to clear display.
Clock may need to be reset.
Making the Numbers
Increase at a Faster
Rate
Time increases in larger increments
the longer
+
or pad is held.
Timer Signal
When time elapses, timer beeps
until TIMER pad is pressed.
Preheat Signal
After setting oven to bake and
selecting a temperature, oven
preheats. When oven reaches set
temperature, signal sounds six
times. The preheat light will remain
on with the oven light while the
oven is on.
If These Features
are Different from
Yours
These examples are
intended to show the variety of
features that are available in the
product line. If your range does not
have all the options that are shown,
it is not a mistake. The information
provided applies to several of the
models in the product line.
Setting Electronic Clock
Electronic clock has 3 modes—Clock displayed, set clock (display flashes),
and clock not displayed. Press CLOCK pad to advance through these modes.
The 12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until pad is pressed or temperature
knob is turned.
1. Press CLOCK pad.
2. Press
+
or pad until correct
time-of-day displays.
3. Press CLOCK pad to set time.
• If CLOCK pad is not pressed,
approximately 60 seconds after
last entry, "TIME" disappears and
clock is set.
Setting Minute Timer
The timer is a timer only. Electronic timer does not control bake, broil, or
self-clean function. Timer can be set up to 11 hours and 59 minutes.
1. Press TIMER pad.
2. Press
+
or pad until desired
amount of time displays.
• Timer begins counting down
automatically after time is
entered.
• To view clock while timer
counts down, press CLOCK
pad. To view timer again, press
TIMER pad.
3. Press and hold TIMER pad to cancel timer signal.
• After time elapses, timer beeps approximately once
a second until TIMER pad is pressed.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER pad, then
+
or pad until new time displays. To cancel timer when remaining time is
displayed or when signal is beeping, press TIMER pad.
TIMER
HRS
+
HRS
-
HRS
+
HRS
-
+
MINS
-
MINS
CLOCK
TIMER
HRS
+
HRS
-
HRS
+
HRS
-
+
MINS
-
MINS
Loading ...
Loading ...
Loading ...