Loading ...
Loading ...
Loading ...
Foxwell F1000B OBDII&Battery Tester User’s Guide_ English Version_V1.00
11
●Service $08 - request control of on-board system, test or component
●Service $09 - request Vehicle Information
●Service $0A - request Emission related DTCs with permanent status
When Diagnostics application is selected from Home screen, the OBDII&Battery tester starts to
detect the communication protocol automatically. Once the connection has established, a menu
that lists all of the tests available on the identified vehicle displays. Menu options typically include:
● Read Codes
● Freeze Frame Data
● Erase Codes
● Live Data
● I/M Readiness
● O2 Sensor Test
● On-board Monitor Test
● Component Test
● Vehicle Information
● Modules Present
● Unit of measure
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by
the year, model, and make of the test vehicle. A “The selected mode is not supported!” message
displays if the option is not applicable to the vehicle under test. When the OBDII&Battery tester
links to vehicle, it checks the status of I/M Monitors automatically, and gives a summary report on
the display as illustrated below.
Figure 4-1 Sample System Status Screen
NOTE
If vehicle is equipped with more than one computer module (for example a power train control
module [PCM] and a transmission control module [TCM]), the OBDII&Battery tester identifies
them by their identification names (ID) assigned by manufacturer (i.e. Engine or Module $A4).
A screen with prompted information to erase the previously stored data in order to save the data
from this test displays as below.
Loading ...
Loading ...
Loading ...