Loading ...
Loading ...
Loading ...
82
Table 10-6 Generator Test Results
Result
Description
Charging Normal
The generator is functioning normally.
Output Too Low
The belt linking the starter and the generator is
loose;
The cable linking the starter and battery is loose
or corroded.
Output Too High
The generator is not properly connected to the
ground;
The voltage adjuster is broken and needs
replacement.
Ripple Too Large
The commutation diode is broken.
No Output
The cable is loose;
Some vehicles with power management
systems do not provide path for charging due to
the sufficient load capacity of the battery;
The generator or the voltage adjuster is broken
and needs replacement.
10.5 Out-vehicle Test
Out-vehicle Test is used to test the condition of batteries that are not connected to a
vehicle. This function aims to check the health status of the battery only.
10.5.1 Test Procedure
To start the out-vehicle test
1. Connect the tester clamps to the battery terminals.
2. Tap Battery Test on the MaxiCOM Job Menu. Select Out-vehicle Test. Select
the appropriate battery type, rating standard, and CCA value. Tap Start
Testing to start the test.
Loading ...
Loading ...
Loading ...