Loading ...
Loading ...
Loading ...
Oven Door
, Do not place excessive weight on or stand on an open
o_en door. This could cause the range to tip o\ er. break
Leve ing Legs
Do not attempt to open or close door or operate oven until
door is properly replaced.
Never place fingers between hinge and front oven frame.
Hinge arms are sprung mounted, if accidentally hit. the
hinge will siam shut against oven frame and could injure
your fingers.
Be sure the anti-tip bracket Secures one of the rear
leveling legs to the floor. This bracket prevents the range
from accidentally tipping.
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches}.
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
22
Oven Light (style varies by model)
- Make sure buib Cover and bulb are coo! before touching,
To replace oven light bulb:
1. When oven is cool, hold bulb cover BuL_oovER
in place, then slide wire retainer
off cover. Note: Bulb cover
will fall if not held in place
while removing wire retainer. (
\
2. Remove bulb cover and light
RETAINER
bulb=
3= Replace with a @-watt appliance bulb.
4= Replace bulb cover and secure with wire retainer.
5. Reconnect power to range. Reset clock.
OR
1. Use a dry potholder and very carefully unscrew bulb cover
and bulb.
2. Replace with a a0 watt, oven-rated appliance bulb. Bulb
with a brass base is recommended to prevent fusing of
bulb into socket.
3. Replace bulb cover and reconnect power to range.
4. Reset clock.
Loading ...
Loading ...
Loading ...