Loading ...
Loading ...
Loading ...
Serf-Clean Oven
- [t is normal for parts of the oven to become hot during a
* To prevent damage to oven door. do not attempt to open
the door when LOCK is displa_ed,
, Avoid touching door, window or oven vent area during a
clean cycle.
, Do not use commercial oven cleaners on the oven finish
or around any part of the oven. The} wilJ damage the
finish o_ parts.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soil in the oven.
During the cleaning process, the kitchen should be weil
ventilated to get rid of normal odors associated with cleaning.
Before Se[fmCmeaning
1. Turn off the Oven Light before cleaning. The oven light
may burn out during the clean cycle.
2. Remove ail pans and oven racks from the oven. The oven
racks wiil discolor and may not slide easily after a self-
clean cycle if they are not removed.
3. Clean oven frame, door flame, area outside of gasket, and
around the opening in the door gasket with a nonabrasive
cleaner such as Bon Ami* or detergent and water. The
self-cleaning process does not clean these areas. They
should be cleaned to prevent soil from baking on during
the clean cycle. (The gasket is the seal around the oven
door and window.}
4, To preventda,eage, d onotclean or ,_ _'___
rub the gasket around the oven
door. The gasket is designed to __t_
seal in heat during the clean cycle.
5. Wipe up excess grease or spill-
overs from the oven bottom. This
prevents excessive smoking, flare-ups or flaming during
the clean cycle.
6. Wipe up sugary and acidic spiiiovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resistant, not acid-proof. The porcelain finish may
discolor if acidic or sugary spills are not wiped up before a
self-clean cycle.
To set Self-Clean:
1.
2.
Note: Oven temperature must be below 400° F to
program a clean cycle.
Close the oven door.
Pressthe Clean pad. dean .....
, CLEAN flashes.
, SET flashes in the display. 0
Pressthe Autoset 0 pad. Autoset
, MEd (Medium Soil, 3 hours:) is displayed.
Pressthe Autoset 0 pad to scroll through the self-cleaning
settings.
HVy (Heavy Soil, 4 hours}
MEd (Medium soil, 3 hours}
LifE (Light Soil, 2 hours}
Choosing the soil level of the oven automatically programs
the self-cleaning time.
After four seconds, the oven wiil start cleaning.
, If the door is not closed, beeps wiil sound and "door" wiil
display. If the door is not closed within 30 seconds, the
self-cleaning operation wiil be canceled and the display
wiil return to the time of day.
, CLEAN wiil appear in the display.
, LOCK wiil flash in the display. Once the door locks, the
word wiil remain steady.
, The cleaning time wiil start counting down in the display.
To Delay a Self-Clean Cycle:
1. Pressthe Delay 1 pad. 1
[
° DELAY flashes.
Delay
° 00:00 wi[[ flash in the display,
2, Enter the amount of time you want to delay the cycle using the
appropriate number pads.
3, Press the Clean pad,
° SET flashes in the display,
4. Press the Autoset 0 pad.
f_
° LifE (Light soil level} is displayed. U
Autoset
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
18
Loading ...
Loading ...
Loading ...