Loading ...
Loading ...
Loading ...
4
Before using for the first time
1 Remove the plastic blade covers from the knife
blade. Take care the blades are very sharp.
These covers should be discarded as they are to
protect the blade during manufacture and transit
only.
2 Washthepartssee‘careandcleaning’.
Key
Processor
1
Pusher
2
Feed tube
3
Lid
4
Bowl
5
Detachable drive shaft
6
Power unit
7
Pulse button
8
Speed 1 button
9
Speed 2 button
bk
OFF button
bl
Cord storage (at back)
bm
Safety interlocks
bn
Plastic Blender
a
Blade assembly
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
A Standard Attachments
b
Knife blade
b
Dough tool
b
Emulsifying tool
b
4mm slicing/grating disc
B Optional Attachments
(*select models
only)
b
2mm slicing/grating disc *
bt
Extra fine grating disc *
ck
Mini chopper/mill *
To Use Your Food Processor
Illustrations
1
–
3
1 Fit the detachable drive shaft onto the power unit.
2 Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3 Fit an attachment over the bowl drive shaft.
l
Always fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid
- ensuring the top of the drive shaft/tool
locates into the centre of the lid.
5 Plug in, switch on and select a speed. (Refer to
the recommended usage chart).
l
The processor will not operate if the bowl or lid
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
l
Use the pulse (P) for short bursts. The pulse
will operate for as long as the button is held in
position.
6 Reverse the above procedure to remove the lid,
attachments and bowl.
Important
l
Your processor is not suitable for crushing or
grinding coffee beans, or converting granulated
sugar to caster sugar.
l
When adding almond essence or flavouring to
mixtures avoid contact with the plastic as this may
result in permanent marking.
Using The Attachments
Refer to recommended usage chart for
each attachment.
13
Plastic Blender
To Use Your Blender
Illustrations
4
–
6
1 Fit the sealing ring into the blade
assembly - ensuring the seal is located correctly in
the grooved area.
l
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly and
insert the blades into the goblet - turn anti-
clockwise until it is secure. Refer to the graphics
on the underside of the blade assembly as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid onto the goblet and turn clockwise until it
clicks. Fit the filler cap.
5 Fit the blender to the power unit and turn
clockwise to lock in position.
Hints and Tips
l
When making mayonnaise, put all the ingredients,
except the oil, into the blender. Remove the filler
cap. Then, with the appliance running, add the oil
slowly through the hole in the lid.
l
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to process,
add more liquid.
l
The processing of spices is not recommended as
they may damage the plastic parts.
l
To blend dry ingredients - cut into pieces, remove
the filler cap, then with the appliance running,
drop the pieces down one by one. Keep your
hand over the opening. For best results empty
regularly.
5722000053 Iss 1 Braun FP3131_FP3132 Multilingual.B5.indd 4 27/11/2019 08:05
Loading ...
Loading ...
Loading ...