Loading ...
Loading ...
Loading ...
25
HOW TO USE A MAP WORKOUT
Note: To use a map workout, the console must be con-
nected to a wireless network (see HOW TO USE THE
WIRELESS NETWORK MODE on page 28).
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 21.
2. Select the main menu or the workout library.
Touch the Home or Browse buttons on the screen
to select either the main menu or the workout
library.
3. Select a workout.
To select a workout, touch the desired button on
the screen. Note: The featured map workouts on
your console will change periodically. If you wish to
save your workout for future use, you can add it as
a favorite by touching the heart button in the upper-
right corner of the screen. You may also be able
to either save or publish your results using one of
the options on the screen. To draw your own map
workout, see this page.
The screen will show the duration and distance of
the workout and the approximate number of calo-
ries you will burn during the workout.
4. Start the workout.
Touch the Start button to start the workout. A
moment after you touch the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
During the workout, a map on the screen will show
your progress.
The workout will function in the same way as the
manual mode (see pages 23 to 24).
When you reach the end of the workout, the
walking belt will slow to a stop, and a workout
summary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen.
5. Monitor your progress with the display modes.
See step 5 on page 23.
6. Measure your heart rate if desired.
See step 6 on page 24.
7. Turn on the fan if desired.
See step 7 on page 24.
8. When you are finished exercising, remove the
key from the console.
See step 8 on page 24.
HOW TO USE A DRAW YOUR OWN MAP
WORKOUT
Note: To use a draw your own map workout, the
console must be connected to a wireless network (see
HOW TO USE THE WIRELESS NETWORK MODE on
page 28).
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 21.
2. Select a draw your own map workout.
To select a draw your own map workout, touch the
Create button on the screen.
3. Draw your map.
Navigate to the area on the map where you want
to draw your workout by sliding your fingers on the
screen. Tap the screen to add the start point for
your workout. Then, tap the screen to add the end
point for your workout. Note: If you want to start
and end the workout at the same point, use the
Loop or Out & Back buttons on the left side of the
screen. You can also select whether you want your
workout to snap to the road.
Loading ...
Loading ...
Loading ...