Loading ...
Loading ...
Loading ...
10
4
63
62
101
94
13
13
90
7
13
5. Remove and save the four 5/16" x 3/4" Patch
Screws (4).
Identify the Left and Right Base Covers
(82, 83). Slide the Left Base Cover onto the Left
Upright (89), and slide the Right Base Cover
onto the Right Upright (90). Do not press the
Base Covers into place yet.
82
90
83
5
89
81
4. Hold the Right Upright (90) against the
Base (94). Make sure not to pinch the Upright
Wire (81).
Attach the Right Upright (90) and a Wheel (101)
with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4"
Screw (63), a 3/8" x 1 3/4" Screw (62), and four
3/8" Star Washers (13) as shown; do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) and the
other Wheel (not shown) in the same way.
Note: There are no wires on the left side.
4
4
Loading ...
Loading ...
Loading ...