Bosch WGA12400UC User Manual

Loading ...

en-us Installation and connection

6. Press down on the 4 cover caps.

4.6 Connecting the appliance

Connecting the water inlet hoses

1. Connect the water inlet hose for hot water (red) and

cold water (blue) to the appliance.

2. Connect the water inlet hose for hot water (red) and

cold water (blue) to the faucet (26.4mm = 3/4").

If there is no faucet for hot water, only connect the wa-

ter inlet hose for cold water. Cover the hot water con-

nection on the appliance in order to protect it from dirt.

Tip:To protect against dirt, use a 3/4" end cap on the

hot water connection of the appliance.

3. Open the faucets carefully and check that the connec-

tion points are tight.

Water outlet connection types

This information is intended to help you to connect this ap-

pliance to the water outlet.

NOTICE:

When draining, the water drain hose is subject to water

pressure and may come loose from the installed connec-

tion point.

▶Secure the water drain hose against unintentional loos-

ening.

Note:Observe the draining heights.

The maximum draining height is 39 in. (100cm).

Siphon Secure the connection point

with a (0.94–1.57 in. (24–

40mm)) hose clamp.

Washbasin Fix and secure the water

outlet hose with an elbow.

Plastic pipe with rubber

sleeve or gully

Fix and secure the water

outlet hose with an elbow.

Loading ...

Bosch WGA12400UC 300 Series 2.2 cu. ft. 24 Inch Front Load Washer