Delonghi PACEX130CSTWIFI Pinguino Care4Me 3.3 kW

Instruction Manual - Page 4

For PACEX130CSTWIFI.

PDF File Manual, 9 pages, Read Online | Download pdf file

PACEX130CSTWIFI photo
Loading ...
Loading ...
Loading ...
17
Maximum speed: to reach the desired
temperature as soon as possible.
The appliance automatically chooses the best
fan speed based on the temperature selected
and the environmental conditions.
The most suitable temperatures during the summer range from 24
to 27°C. However, setting the temperature signicantly lower than
the outdoor temperature is not recommended.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in
the room (spring and autumn, damp
rooms, rainy periods, etc). For this
type of use, the appliance must be set
up as for air conditioning mode. That
is, the air exhaust hose (B2) must be
tted to the appliance to allow the
humidity to be discharged outside.
To correctly set this mode:
Touch repeatedly the MODE key (C2) until the dehumidify-
ing symbol appears.
The appliance will automatically choose the best air ow.
FAN MODE
When using this mode, the air ex-
haust hose (B2) does not need to be
attached to the appliance.
To correctly set this mode:
Touch repeatedly the MODE
(C2) key until the fan sym-
bol appears.
Select the desired fan speed by touching the key .
The air ows available are:
Minimum air ow: when most silent operation is
desired.
Medium air ow: when the noise level needs to
be low but with a good comfort level.
Maximum air ow: for maximum performance.
SELECT THE TEMPERATURE SCALE
The temperature can be displayed
in °C or °F. To change the tem-
perature unit of measure touch
simultaneously for ten seconds the
increase (C3) and decrease
(C4) key.
OPERATING FROM THE CST (Cool Surround Tec-
nology) REMOTE CONTROL
The CST remote controller is based on Bluetooth® Low Energy
communication with the Pinguino.
The appliance works at its best only when it works together with
the CST remote control.
INSERTING OR REPLACING THE BATTERIES
Remove the cover on the rear of the remote control.
Insert or replace the batteries with two new LR6 AA 1.5V
batteries, inserting them correctly (see the instructions in-
side the battery compartment) (g. 10).
Replace the cover.
If the remote control unit is replaced or discarded, the bat-
teries must be removed and disposed of in accordance with
current legislation as they are harmful to the environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries. Do not dispose of batteries in re. Batteries may
explode or leak. If the remote control is not be used for a
certain length of time, remove the batteries. Use only bat-
tery within the expired date.
Note: when the device is in standby and CST is absent (without
batteries or out of range), the search for the Bluetooth connec-
tion with CST will stop after about 1 hour. For it to resume, it is
necessary to turn the apppliance back on.
Loading ...
Loading ...
Loading ...