Loading ...
15
SLIDING WINDOWS
• Thanks to the locking wing nut, it’s possible to use the win-
dow bracket also for sliding windows. Position the bracket
vetically with the hole in the lower part so to allow a easier
installation of the exhaust hose.
AIR CONDITIONING WITH INSTALLATION
• Fit the air exhaust hose (B2) in the relevant housing located
on the rear side of the appliance (g. 1).
• Drill a hole 150 mm in an outside wall or through a window
panel. Respect the distances, dimensions and heigh of the
hole given in gure 8.
ø 150mm
in the
window
panel
in the wooden
kickboard of a
French window
in the wall: you are
recommended to
insulate the section
of wall using suita-
ble insulation.
• Fit the wall ange (B1) into the hole.
• Fit the air exahaust hose (B2) into the wall ange (B1) (Fig.
9)
• When the hose (B2) is not connected, the drilled hole can
be closed with the ange cap (B1).
Please note: As special tools are required for installation, we
suggest you have the appliance installed by specialized person-
nel.
• When installing the air conditioner, you should leave a door
slightly open little as 1 cm to guarantee correct ventilation
and room pressure.
• Keep the air hose as short and free of curves as possible to
avoid constrictions.
OPERATING FROM THE CONTROL PANEL
C1
C20
C18
C12
C11
C10
C9
C13
C6
C15
C16C17
C3
C4
C2
C5
C14
C8
C7
C19
DESCRIPTION OF THE CONTROL PANEL (C)
C1 ON/STAND-BY (on/o) key
C2 Function selection key MODE (air conditioning, dehumidi-
fying, fan, ON-OFF Wi-Fi - reset WLAN settings)
C3 Temperature increase key
C4 Temperature decrease key
C5 Fan speed selection key (MIN/MED/MAX/AUTO)
C6 Air conditioner symbol
C7 Dehumidifyìng symbol
C8 Fan symbol
C9 myEcoReal Feel status indicator
C10 Swing symbol
C11 Fan speed indicator
C12 SILENT symbol
C13 Alarm symbol
C14 Set temperature values, programmed on/o time
C15 Timer symbol
C16 Timer indicator
C17 Set temperature values, programmed on/o time
C18 App Indicator
C19 App timer/calendar
C20 Wi-Fi symbol
Loading ...
Loading ...
Loading ...