Loading ...
Loading ...
16
CONTROL PANEL OPERATION
TURNING THE APPLIANCE ON AND OFF
Insert the plug in the socket. Two dashes appear on the display
indicating that the appliance is in stand-by.
Touch the (C1) key to turn on the appliance.
The ap A1 will open after few seconds. When the appliance
comes on the last function set before it was shut o is activated.
Please note: If start-up is not continued, after a few minutes
the display light dims in order to reduce energy consumption.
To turn the appliance o, touch the , key and then pull the
plug.
Please note: Never turn o the air conditioner by simply pulling
the plug. Touch the key in order to put your air conditioner in
stand-by and wait a few minutes before pulling the plug. In this
way, the appliance can perform the operating status checks..
MODES SELECTION
To select the desired operating
mode, touch repeatedly the MODE
key (C2) until the desired function
is selected.
Wi-Fi FUNCTION
To select or deselect the Wi func-
tion, keep touching the MODE key
for 3 seconds.
Once the Wi-Fi icon is displayed it means that the following Wi-Fi
features are available:
SYMBOL WI-FI FIXED
it means that the Wi-Fi features are active AND the
“Home WLAN” has been found.
SLOW FLASHING
it means that the appliance is searching for the
“Home WLAN” .*
FAST FLASHING
it means that the “Home WLAN” has not been
found or has not been set yet.
“APP CONTROL “ ICON
When the APP CONTROL icon appears it means that
the last command has been received via app.
If the memorized “Home WLAN” settings needs to be changed,
proceed as follows:
a) keep touching for about 20 seconds the MODE button C2 on
the control panel until a prolonged beep is emitted;
b) the icon and blink simoultaneously.
c) use the app to enter the new WLAN settings into the unit.
* Note: In standby, the search for “Home WLAN” stops after ap-
proximately 1 hour. It will resume once the appliance is turned
on again.
AIR CONDITIONING MODE
This is ideal for hot and humid
weather when the room needs to
be both cooled and dehumidied.
To correctly set this mode:
• Touch repeatedly the MODE
key (C2) until the air condition-
ing symbol appears. The
display will show the desired
temperature.
• To change the temperature
to be reached, touch the
(C3) or (C4) key.
• Select the desired fan speed by touching the (C5) key.
The speeds available are:
Minimum speed: when maximum silent opera
tion is desired.
Medium speed: when the noise level needs to
be low but with a good comfort level.
Loading ...
Loading ...
Loading ...