Loading ...
Loading ...
Loading ...
- 23 -
TROUBLESHOOTING
SYMPTOM
SOLUTION
The detector can
not be turned on.
1. Make sure that the batteries are installed in correct
orientation.
2. Replace the old batteries with new ones of the same type.
Erratic sounds or
target ID cursor
movement
1. Ensure that the search coil is securely connected and that
the search coil cable is snugly wound around the stem.
2. When using the detector indoors, be aware that excessive
electrical interference is present and that floors and walls
may contain reinforcing steel rods or other metallic objects.
3. Make certain whether the search coil is near other metal
detector or other metallic object ( such as electrical power
line, wire fence, etc ).
4. Reduce the detector sensitivity when in the All Metals
Mode.
Intermittent
Signals
Intermittent signals typically mean that the detector have
detected a deeply buried metal object or one that is
positioned at an angle difficult for the detector to read.
Scan from different directions to help define the signal. In the
case of multiple targets, switch to the All Metals Mode and
use the pinpointing function of the detector to precisely
locate all targets.
NOTE:
Iron objects may cause intermittent signals. You can identify
iron objects in the All Metals Mode.
The detector is
incapable of
finding specific
targets
Ensure that you are using a suitable detection mode. If you
want to detect coins, the COINS mode is probably the best
choice to eliminate other unwanted metal objects.
You can also use the All Metals Mode, which detects all
metal targets to ensure that desired targets can be detected.
Loading ...
Loading ...
Loading ...