Loading ...
Loading ...
Loading ...
- 17 -
Use the following procedure to pinpoint a target:
1. Move the search coil around the detected metallic object to determine
the
approximate location of this object. Then move the search coil to this
location, and then hold the search coil in this location and above the
detected object.
2. Press and hold down the PINPOINT button. The display shows the
symbol "PINPOINT" and all the 8 sensitivity indicator bars.
3. Release the PINPOINT button and then immediately ( within 1 sec after
the release of the button ) hold down the button gain. The number of the
displayed sensitivity indicator bars decreases by 1, and the sound volume
of the detector decreases accordingly.
4. Move the search coil a little distance toward the metal signal source
( the detected object ) according to the volume of the sound. The sound
volume of the detector increases as the search coil approaches the metal
signal source ( the detected object ).
5. Repeat step 3 and 4 to approach the target progressively. And in the
end, the target can be pinpointed.
Note:
The detector exits the PINPOINT mode automatically about 3 secs later
after you release the PINPOINT button.
DETECTING METALLIC OBJECTS IN A DISCRIMINATION MODE
If you want to detect a specific type ( or kind ) of metallic objects while
largely ignoring other types of metallic objects during scanning, you should
select a suitable Discrimination Mode. There are 5 Discrimination Modes in
total, they are JEWELRY mode, COINS mode, DEBRIS mode,
ORNAMENTS mode, and CUSTOM mode. You can select any of these
modes to meet your need.
Loading ...
Loading ...
Loading ...