Loading ...
Loading ...
Loading ...
- 18 -
The detector has 12 pixels or "notches" of discrimination, shown on the
horizontal scale ( see Figures 2 and 7 ). In any Discrimination Mode, the
detected target which is accepted by a lighted pixel on the horizontal scale
will cause an increase in sound, and the targets which are rejected by a
blank pixel on the horizontal
scale will probably not cause an increase in sound.
Among these modes, the JEWELRY mode, COINS mode, DEBRIS mode,
ORNAMENTS mode are preset and can not be modified, but in CUSTOM
mode, you can modify the present discrimination pattern freely to create a
desired discrimination pattern to better meet your need.
To select a desired Discrimination Mode, first make sure that the detector is
in a Discrimination Mode. If the detector is in the All Metals Mode ( "ALL
METALS" is display ), press the "ALL-METAL/DISC" button until the
symbol "DISCRIMINATE" appears on the display. Then press the " + " or " -
" side of the "SENSITIVITY/MODE SELECTION" to select among the 5
Discrimination Modes.
Whenever a mode is selected, the display will show the corresponding
mode indicator ( see Figure 2 ) to indicate the presently selected mode.
The five Discrimination Modes are explained as follows:
•JEWELRY Mode
Designed to find jewelry such as rings, watches, bracelets, and necklaces,
while ignoring most iron trash.
•COINS Mode
The COINS mode is designed to find US coins and similar coins and
eliminate common trash items such as iron and foil. Be aware that
medium-sized jewelry may be missed with this discrimination pattern and
that some junk targets ( such as aluminum cans ) may be detected and
cause an increase in sound.
•DEBRIS Mode
Loading ...
Loading ...
Loading ...