Loading ...
Loading ...
Loading ...
- 10 -
Note:
1. The two rubber washers are to be placed in the two circular slots at the
two sides of the end of the lower stem before slipping the search coil onto
the end of the lower stem.
2. Gently turn the relevant stem lock nut on the middle stem in proper
direction to fasten the lower stem only after the lower stem is inserted into
the middle stem and the two buttons on the lower stem pop into desired
holes on the middle stem. Similarly, gently turn the relevant stem lock nut
on the middle stem in proper direction to fasten the S-shaped upper stem
only after the upper stem is inserted into the middle stem and the two
buttons on the upper stem pop into desired holes on the middle stem.
3. To avoid damage, do not pull cable with force.
How to adjust the length of the detector:
1. Gently and counterclockwise turn the lower stem lock nut until it loosens.
2. Depress the two lower buttons on the middle stem, and adjust the lower
stem's position until the two buttons pop into the desired holes on the
middle stem. ( Tip: To be able to adjust the lower stem's position, it may be
necessary to further insert the lower stem into the middle stem a little and
then turn the lower stem a little while depressing the two buttons. )
3. Turn the stem lock nut clockwise until the lower stem is secured.
Loading ...
Loading ...
Loading ...