Loading ...
Loading ...
Loading ...
5.6 Battery Setup Menu
Batt Mode
Lithium
Use Batt V
Battery Setting
Activate Battery
Max A Charge
Batt Capacity
Max A Discharge 40A
40A
400Ah
Batt
Mode
Use Batt %
No Batt
Battery capacity: it tells hybrid inverter to know
your battery bank size.
Use Batt V: Use Battery Voltage for all the settings (V).
Use Batt %: Use Battery SOC for all the settings (%).
Max. A charge/discharge: Max battery charge/discharge
current(0-120A for 5KW model, 0-135A for 6KW model,
0-190A for 7.6/8KW model).
For AGM and Flooded, we recommend Ah battery
size x 20%= Charge/Discharge amps.
. For Lithium, we recommend Ah battery size x 50% =
Charge/Discharge amps.
. For Gel, follow manufacturer' s instructions.
No Batt: tick this item if no battery is connected
to the system.
Active battery: This feature will help recover a
battery that is over discharged by slowly charging
from the solar array or grid.
Grid ChargeGen Charge
Grid SignalGen Signal
Gen Force
Battery Setting
Start
A
30% 30%
40A
40A
Batt
Set2
①
②
③
This is Battery Setup page.
Start =30%: Percent S.O.C at 30% system will AutoStart a
connected generator to charge the battery bank.
A = 40A: Charge rate of 40A from the attached
generator in Amps.
Gen Charge: uses the gen input of the system to charge
battery bank from an attached generator.
Gen Signal: Normally open relay that closes when the
Gen Start signal state is active.
Gen Force: When the generator is connected, it is forced
to start the generator without meeting other conditions.
①③
Start =30%: No use，Just for customization.
A = 40A: It indicates the Current that the
Grid charges the Battery.
Grid Charge: It indicates that the grid charges
the battery.
Grid Signal: Disable.
This is Grid Charge, you need select.
②
07/08/2021 11:11:10 Thu
76%
2.00
KW
-1.39
KW
0.00
KW
KW
0 7
0 5
0 5
0 5
ON
Signal
on
2.00
This page tells the PV and diesel generator
power the load and battery.
Loading ...
Loading ...
Loading ...