Loading ...
Loading ...
Loading ...
Network Camera User Manual
145
Unlock
(1) If you use the memory card on the camera that locks it, unlocking will be done
automatically and no unlocking procedures are required on the part of users.
(2) If you use the memory card (with a lock) on a different camera, you can go to
HDD Management interface to unlock the memory card manually. Select the
memory card, and click the Unlock button shown next to the Format button.
Then input the correct password to unlock it.
Notes:
• The memory card can only be read and written in when it is unlocked.
• If the camera, which adds a lock to a memory card, is restored to the
factory settings, you can go to the HDD Management interface to unlock
the memory card.
Remove the Lock
(1) Select the Lock Switch as OFF.
(2) Input the correct password in Password Settings text field.
(3) Click Save to save the settings.
4. Set the Arming Schedule and Linkage Method, if you want to receive a notification
when the health status of the memory card is anything other than good. Refer to
Task 2: Set the Arming Schedule for Motion Detection and Task 3: Set the Linkage
Method for Motion Detection in 10.1.1 Configuring Motion Detection.
5. Click Save to save the settings.
Configuring Lite Storage
Purpose:
When there is no moving object in the monitoring scenario, the frame rate and bitrate
of the video stream can be reduced to lengthen the storage time of the memory card.
Notes:
Only certain camera models support the function.
The video files recorded in lite storage mode will be played back in full frame
Loading ...
Loading ...
Loading ...