Loading ...
Loading ...
Loading ...
The following project time bases are available:
• 23.98 FPS (Default) • 25.00 FPS • 30.00 FPS • 59.94 FPS
• 24.00 FPS • 29.97 FPS • 50.00 FPS • 60.00 FPS
When you select the Project Time Base, it changes the Recording Frame Rate to the same setting (when possible).
When you change the Format, the Recording Frame Rate and Project Time Base do not automatically update. You must
select the Project Time Base after you change the Format setting.
R3D QUALITY
Use R3D Quality to select the R3D data rate the camera uses to record the image files.
The R3D Quality selections include:
HQ - High data rate and less recording time
MQ - Medium data rate (default) and longer recording time
LQ - Lowest data rate and longest recording time
For high complexity scenes, VFX, and stills from motion workflows, RED recommends the HQ setting. For cinema (non-
VFX) and high-end TV, RED recommends the MQ setting. For TV, online content, documentary and interviews, RED
recommends the LQ setting.
PRE-RECORD
Use the Pre-Record menu to enable or disable Pre-Record, and to adjust the length of the Pre-Recorded clip.
Pre-Record allows you to continually capture images to a small amount of memory while waiting to begin recording.
This allows you to capture unexpected events such as, a whale breaching the water, or a an athlete scoring a goal.
When you finish recording, the pre-recorded clip is added to the beginning of the recording.
You can set the Pre-Record clip to record from half a second up to 30 seconds, depending on the format, file type,
resolution, and quality. The default setting is 2 seconds at the default Project Time Base of 23.98 FPS.
For more information, refer to Pre-Recording Content.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 80
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...