Loading ...
Loading ...
Loading ...
During the upgrade, the fans run at high speed and the following occurs:
The camera displays the SHUTTINGDOWN screen and reboots
The camera restarts and displays the UPGRADING screen
The camera displays the INITIALIZING screen
The camera displays the FIRMWAREUPGRADE progress screen:
The Firmware Upgrade success message screen displays with a RESTART button:
10. Press the button under RESTART. The camera displays the SHUTTINGDOWN screen and reboots again.
11. The camera restarts displaying the V-RAPTOR 8K V V start screen, the INITIALIZING screen, and then the Software
License Agreement (SLA) displays:
12. Press the button under Agree. If you do not agree to the SLA, the camera cannot be used. The SLA continues to
display until it is accepted.
13. Recalibrate the camera before recording. Refer to the Calibration section and Calibrating the Sensor for more
information.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 196
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...