Loading ...
Loading ...
Loading ...
EDGECODE
Edgecode only advances while the camera is recording frames. Each frame is sequential. When the media is replaced,
the new media starts the timer over. You can set the Edgecode timer manually by using Secure Format (refer to Secure
Format for more information).
SETTING UP EDGECODE TIMECODE
To set up Edgecode Timecode on the camera, perform the following:
1. Open the Audio / Timecode menu: Menu > Audio / TC:
2. Navigate down to Timecode Display Mode:
3. Press SEL to select Timecode Display Mode. The Timecode Display Mode menu opens:
4. Select Edge and press the button under OK to use Edgecode. The camera displays the Edgecode on the LCD Home
page:
NOTE: Each new media card will default to an edgecode track starting at 01:00:00. You can change the edgecode to
begin at any desired time by using the Media Format menu (refer to Edgecode).
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 191
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...