Loading ...
Loading ...
Loading ...
RED MONITOR INTERFACE CABLE
The DSMC3 RED
®
Touch 7.0" LCD monitor includes a custom RED Monitor Interface (RMI) cable that provides
communication between the RMI and the monitor.
Where this cable attaches to the RMI and the monitor, there are special locking features that keep the cable from
accidentally detaching.
To unlock the cable locks, rotate the RMI cable lock and slide the monitor cable lock as shown in the image:
NOTE: The USB-C-style DSMC3 RMI cable is a custom-pinned cable, which is not compatible with standard USB-C
cable ports.
MONITORING
The camera provides several methods for monitoring the image. These monitoring methods include:
DSMC3 RED
®
Touch 7.0" LCD
SDI output to a monitor
RED Control over Wi-Fi to iOS or Android devices
RED Control over USB-C to iOS or Android devices
USB-C to Ethernet adapter to a computer
Live Stream
DSMC3 RED
®
TOUCH 7.0" LCD
The optional DSMC3 RED Touch 7.0" LCD provides a 1920 x 1200 resolution live image from the camera sensor. By
using the Monitoring menu you can use display guides, exposure tools, focus tools, and a magnified image on this
monitor (refer to Top LCD).
SDI OUTPUT TO A MONITOR
SDI ports 1 and 2 provide a 12G SDI signal to allow viewing of the camera image on a 4K SDI monitor.
Use the SDI 1 and 2 menus to select the settings for SDI output, Tools, and Guides (refer to SDI 1 / 2).
WARNING: Under certain circumstances, it is possible for an SDI connector to incur damage when connected to an
accessory and powered without using shielded cables. RED recommends only using high quality, shielded BNC cables
that are rated for 12G-SDI signals and only using shielded power cables for powering SDI accessories.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 182
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...