Loading ...
Loading ...
Loading ...
FTPS CONFIGURATION
The File Transfer Protocol Secure (FTPS) offers a fast and secure system for transferring data to and from the camera.
FTPS is available when the camera is enabled and connected to a network over Wi-Fi or through the USB-C port to an
Ethernet adaptor.
The settings for using FTPS on the camera include:
Protocol: FTP or FTPS
Host: [IP ADDRESS OF THE CAMERA]
Port: 21
Encryption: TLS/SSL Explicit encryption
Username: [USERNAME IN FTPS MENU SETTINGS]
Password: [PASSWORD IN FTPS MENU SETTINGS]
Logon Type: Normal
NOTE:
File transfer speeds may vary depending on the strength of the signal (when using Wi-Fi) and the amount of network
traffic. For the fastest and most reliable data transfer, we recommend using a hard-wired connection.
Steps may differ depending on which FTP software you wish to use, consult your software’s user guide for additional
assistance.
When setting up FTP, make sure you use FTP or FTPS and not SFTP as these are different protocols.
For security reasons, the FTPS host name and password are only displayed on the camera FTPS menu.
CAMERA SET-UP
1.
Connect your camera to the network with the desired connection method (Ad-Hoc, Infrastructure or USB-C) and
verify the connection. A successful connection is confirmed when the camera displays "Connected" in the Wi-Fi
Status:
2.
Navigate to Menu > Communication > FTPS. Take note of the username and password. You can also enter a new
password.
3.
Enable the user permissions by toggling Settings or Media to the on or off position. The media folder will display as
an empty folder on the FTP App when Media Access is disabled (off).
4.
The camera is now set-up on FTPS.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 151
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...