Loading ...
Loading ...
Loading ...
FALSE COLOR MODES
Press the button below the False Color tools column to cycle through the choices.
False Color Modes include:
ITEM DETAILS
False Color Video Mode Access scene exposure in varying light without relying on the LCD image brightness.
False Color Exposure Mode Use false colors to determine an optimal balance between overexposure and
underexposure.
NOTE: False Color modes display on video recorded through SDI to an external recorder when the Tools are enabled in
the Monitor menu. When recording through SDI, use False Color modes only to help determine scene exposure
settings, and then disable the mode before recording.
FALSE COLOR VIDEO MODE
NOTE: For best results, Video Mode should be viewed at or above ISO 800.
Video Mode displays a color overlay that indicates the video level of the RGB monitor path (calibrated to the SMPTE
test signal).
The colors used are based on the RGB levels of the video out signal (that is, the “cooked” look, and not RAW data). The
camera's RGB settings can change the appearance of the Video Mode colors.
For more information, refer to False Color.
FALSE COLOR EXPOSURE MODE
When this monitoring False Color mode is activated, most of the tonal range will appear in monochrome.
The Exposure Mode is able to indicate exactly where middle gray is falling, and indicate which highlights or shadows
are problematic in the logarithmic representation of the image. Exposure mode is judging the exposure after ISO and
White Balance adjustments are made, and before any sort of LUT or transform is applied to the Log3G10 image.
For more information, refer to False Color.
ZEBRA TOOLS
Use Zebra 1 to display one set of diagonal stripes to indicate highlight exposure levels. Use Zebra 2 to display a second
set of diagonal stripes to indicate mid-tone and shadow levels. For more information, refer to Zebra Modes.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 37
V-RAPTOR™ 8K V V OPERATION GUIDE
Loading ...
Loading ...
Loading ...