User Manual - Page 13

The barbeque and hood come fully assembled, with the gas hose connected to the inlet manifold. To assemble, the stand must rst be built (note: for transportation reasons, the barbeque

is packaged bolted to the stand top, and should be removed before attempting to assemble the stand). The barbeque is placed back inside the stand after it has been assembled and

reattached (it can be removed to cook from a raised bench). Only a medium size Philips screwdriver is needed. Open the carton from the top and remove the parts. Remove all packaging

(especially check inside the barbeque chassis) and place parts on a clean surface. Check for any damage or missing parts (if found, contact your service department).