Loading ...
Loading ...
Loading ...
12
Assembly, Operation & Maintenance Instructions
Cylinder valve is not on Turn cylinder valve on
Cylinder is empty Replace with a full cylinder
Igniter is not sparking Remove plate and visually check ignition box for a spark. Check that the cables to ignition point, or from the valve to the chassis have not broken or
disconnected. Also check the alignment of the sparker. If there is no spark, contact Everdure by Heston Blumenthal Service.
Injector is blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
TROUBLESHOOTING
Burner will not ignite when using the igniter:
Burner ame is erratic:
Gas is leaking from connections:
Burner is blocked Remove cooking surface and check burner for obstruction. Clean ports.
Flame is burning inside
burner (hissing sound)
Turn o burner, allow to cool and re-ignite.
Regulator is faulty Contact Everdure by Heston Blumenthal Service.
Injector is partially blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
Connections are loose Tighten loose connections (do not over-tighten) and leak test under pressure with soapy water solution (page 6).
Hose has deteriorated Contact Everdure by Heston Blumenthal Service - replace.
Gas valve is faulty Contact Everdure by Heston Blumenthal Service.
Threads are damaged Contact Everdure by Heston Blumenthal Service.
Loading ...
Loading ...
Loading ...