Loading ...
Loading ...
Loading ...
Chapter 5 Appendix
4.1 Simple Measurement
To acquire and display a signal, please do the steps as follows:
1. Connect signal to CH1 by using probe
2. Click the button on toolbar or “Acquire” -> “Auto Setup” on menu.
To measure the frequency and “Vpp”, you can do these steps as follows:
1. Click the “Measure”-> “Horizontal”-> “Frequency” button, the frequency of the signal
display on the bottom of the waveform interface.
2. Click the “Measure”-> “Vertical”-> “Peak-to-Peak” button, the “Vpp” of the signal will
also display on the bottom of the waveform interface.
3. To clear the measurement on the waveform interface, click the “Measure”-> “Clear
Measure” button
.
Hantek6102BE/Hantek6212BE User’s Manual 68
Loading ...
Loading ...
Loading ...