Loading ...
Loading ...
Loading ...
Chapter 3 Functions
In the “Format” item, set the waveform display format (Y-T, X-Y and Roll).
Y -T: Shows the relative relation between vertical voltage and horizontal time.
right to left.
er.
aution: If the time/div bigger than 1s, the format will change to Roll mode automatically.
.3.3 Change Horizontal Position
The “Zero” menu:
Roll: In Roll Mode, the waveform display updates from
X -Y: Show CH1 value at X axis; CH2 value at Y axis.
In Roll mode, the waveform display rolls from right to left. No trigger or horizontal offset control
of waveforms is available during Roll Mode, and it’s only available when set to 1s/div or slow
C
3
Click “Zero” to set the trigger point to the horizontal center of the screen.
Horizontal position changes the displayed waveform position, relative to the trigger point.
The user can drag
on screen to change the horizontal position.
3.4 Set Trigger System
Click “Trigger” in main menu.
3.4.1 Set Trigger
The trigger determines when the oscilloscope starts to acquire data and display a wavefo
When a trigger is set up
rm.
properly, it can convert unstable displays or blank screens into
the
meaningful waveforms.
If the oscilloscope wants to acquire a waveform, it collects enough data so that it can draw
Hantek6102BE/Hantek6212BE User’s Manual 36
Loading ...
Loading ...
Loading ...