Loading ...
Loading ...
Loading ...
Chapter 3 Functions
3.1 Setup the Oscilloscope
Use “AUOSET” to display a signal automatically.
Auto setup functions one time each time you push the “AUTOSET” button. The function
obtains a stable waveform display for you. It automatically adjusts the vertical scale, horizontal
scale and trigger settings. Auto setup also displays several automatic measurements in the
graticule area, depending on the signal type.
Connect a signal to the CH1 input:
1. Connect a signal to the oscilloscope as described above.
2. Click the “Acquire -> Autoset” button.
The oscilloscope will change the current settings to display this signal.
Save Setup
The oscilloscope software saves the current setup before you close the oscilloscope software.
The oscilloscope recalls this setup when you run the software next time. You can use the
“Save Setup” menu to permanently save setting.
Load Setup
The oscilloscope can recall the last setup before the oscilloscope software was running, any
saved setups, or the factory setup. You can use the “Load Setup” menu to permanently recall
setup.
Factory Setup
The oscilloscope software is set up for normal operation when it is shipped from the factory.
This is the factory setup. Push the “Factory Setup” menu to recall this setup.
Hantek6102BE/Hantek6212BE User’s Manual 26
Loading ...
Loading ...
Loading ...