Loading ...
Loading ...
Loading ...
Chapter 3 Functions
3.7 Measure Signal
3.7.1 Cursor
Click “Cursor” in main menu.
This method allows you to take measurements by moving the cursors.
1. Source
The user can set the source to CH1, CH2, FFT and MATH. But the FFT source can only use
Trace type.
When you use cursors, be sure to set the Source to the waveform on the display that you want
to measure.
2. Type
There are four types of cursors: Cross, Trace, Vertical and Horizontal.
1) Cross
The Cross cursors appear as cross lines on the display and measure the vertical and
horizontal parameters.
Hantek6102BE/Hantek6212BE User’s Manual 51
Loading ...
Loading ...
Loading ...