Loading ...
Loading ...
Loading ...
Chapter 3 Functions
Period: Time to take for the signal cycle to complete in the waveform
Frequency: Reciprocal of the period of the first cycle in the waveform
Rise Time: Time taken from lower threshold to upper threshold
Fall Time: Time taken from upper threshold to lower threshold
+Duty Cycle: Positive Duty Cycle = (Positive Pulse Width)/Period x 100%,Measured of the
first cycle in the waveform
-Duty Cycle: Negative Duty Cycle = (Negative Pulse Width)/Period x 100%, Measuredof the
first cycle in the waveform
+Pulse Width: Measured of the first positive pulse in the waveform. The time between the
50% amplitude points
-Pulse Width: Measured of the first negative pulse in the waveform. The time between the
50% amplitude points
4. Clear Measure
Clear all measure items on display screen.
The Measure Display Window:
Caution: The results of the automatic measurements will be displayed on the bottom of the
screen. Maximum 8 results could be displayed at the same time. When there is no room, the
next new measurement result will make the previous results moving left, out of screen.
Hantek6102BE/Hantek6212BE User’s Manual 56
Loading ...
Loading ...
Loading ...