Loading ...
Loading ...
Loading ...
Problem Cause
The engine does not run smooth-
ly
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See
To clean and change the air filter on page 23
.
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
The engine apparently has no
power
The air filter is clogged. See
To clean and change the air filter on page 23
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle cable is incorrectly adjusted.
The transmission does not have
sufficient power
The transmission cold air intake or the cooling fins are blocked.
The fan on the transmission is damaged.
There is no oil in the transmission or the oil level is too low. See
To do a check
of the transmission oil level on page 29
.
The battery does not charge The battery is defective. See
Battery safety on page 12
.
The connection at the cable connectors on the battery terminals is bad. See
Battery safety on page 12
.
There is vibration in the product The blades are loose. See
To examine the blades on page 28
.
One or more of the blades are unbalanced. See
To examine the blades on page
28
.
The engine is loose.
The cutting result is unsatisfacto-
ry
The blades are blunt. See
To examine the blades on page 28
.
The grass is long or wet. See
To get a good cutting result on page 18
.
The cutting deck is skew.
There is grass blockage in the cutting deck. See
To clean the product on page
21
.
The tire pressure is different on the right and left sides. See
Tire pressure on
page 25
.
The product is operated at a too high speed. See
To get a good cutting result on
page 18
.
The engine speed is too low. See
To get a good cutting result on page 18
.
The drive belt slips.
844 - 011 - 08.11.2022 31
Loading ...
Loading ...
Loading ...