Husqvarna R 316TSX AWD R 316TsX AWD Rider

Operator's Manual - Page 18

For R 316TSX AWD.

PDF File Manual, 164 pages, Download pdf file

Loading ...
Loading ...
Loading ...
2. Turn the ignition key to the STOP position.
3. When the product stops, apply the parking brake.
To apply and release the parking brake
1. Press the parking brake pedal down (1).
2. Press and hold the lock button (2).
1
2
3. Keep the button pressed and release the parking
brake pedal.
4. To release the parking brake, press the parking
brake pedal again.
To get a good cutting result
For best performance, do maintenance on the
product regularly as given in the maintenance
schedule. Refer to
Maintenance schedule on page
19
.
Do not cut a wet lawn. Wet grass can give a bad
cutting result.
Start with a high cutting height and decrease it
gradually.
Cut with blades that rotate at high speed (highest
permitted engine speed, refer to
Technical data on
page 35
). Move the product forward at low speed.
If the grass is not too high and thick, you can get a
good cutting result also at a higher speed.
Cut the grass in an irregular pattern.
To get the best cutting result, cut the grass
frequently and use the BioClip function.
To attach load to the engine cover
The product has rails and rail brackets on the engine
cover to attach load.
1. Adjust the rail brackets to fit the load.
a) Loosen the screw and move the rail bracket
forward or rearward on the rail.
b) Tighten the screw.
2. Put a strap through the hole in the rail bracket (A).
B
A
3. Put the strap through the rail bracket (B) on the
opposite side.
4. Use the rail brackets to attach the load with straps.
CAUTION:
Do not overload the
rails. Refer to
Technical data on page
35
.
18 844 - 011 - 08.11.2022
Loading ...
Loading ...
Loading ...