Loading ...
Loading ...
Loading ...
Using the MIDI Recorder to Record
EN-98
• The operation below deletes only the data in the table
below from the specified tracks.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “WholeTrk”, and then press [6]
(ENTER).
This displays “Clear”.
3.
Use the [1] (V) and [3] (W) keys to select the
data you want to delete.
• If you selected “AcompClr”, advance to step 6. If you
selected anything else, advance to step 4.
4.
Press [6] (ENTER).
This displays “Trk Sy”.
5.
Use bn [–] and [+] or the bl dial to specify the
target track.
6.
Press [6] (ENTER).
This displays “Sure?”
7.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-95).
You can quantize, key shift, delete, or perform other
operations in measure units for each track included in a
recorded song.
• Quantize automatically corrects the timing of notes
recorded in a track to match a note value being used as the
quantize reference (note event note on timing).
• Key shift offsets the pitch of recorded notes (note events) in
semitone steps.
• In the procedure below, you specify a start measure (Point
A or simply Point), and an end measure (Point B). The
section specified by “Looping Playback of Specific Song
Measures (A-B Repeat)” (page EN-39) is used as the initial
default for this specification.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “Trk Meas”, and then press [6]
(ENTER).
This displays “Quantize”.
3.
Press [6] (ENTER) again.
This displays “Trk Sy”
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Point A”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to quantize, and then press [6] (ENTER).
This displays “Point B”.
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to quantize, and then press [6] (ENTER).
This displays “Value”.
7.
Use bn [–] and [+] or the bl dial to specify the
note value to be used as the quantize reference
note.
To delete specific data from a specified track
Target Track Deleted Data
System Track Note events
Accompaniment operation data
All data except accompaniment
operations and note events
Solo track Note events
All data except note events
To delete this: Display this:
Note events Note Clr
System track accompaniment
operation data
AcompClr
All data except system track
accompaniment operations and note
events
OtherClr
All data except solo track note events
Editing a Track of a Recorded
Song in Measure Units
To quantize a specified track in measure
units
Display Description
4, 8, 16, 32 Quarter note, eighth note, sixteenth
note, thirty-second note
4d, 8d, 16d, 32d Dotted notes
4t, 8t, 16t, 32t Triplet notes
CT-X9000_8000IN_EN.book 98 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...