Loading ...
Loading ...
Loading ...
EN-101
Using the MIDI Recorder to Record
■ Tone Number Event
The tone number is displayed by the event name “Tone”.
■ Rhythm Number Event
The rhythm number is displayed by the event name “Rhythm”.
■ Auto Accompaniment Chord Event
Only the chord root and type of Auto Accompaniment chords
are displayed.
An event named “NonChord” is displayed when a chord is
configured not to sound.
■ End of Track
“EOT” (End Of Track) is displayed when the end of the target
track (part) is reached.
The ranges of the event settings are shown in the table below.
*1 CT-X9000IN: 1 to 408, CT-X8000IN: 1 to 358
*2 See “Auto Accompaniment Chord Event” (page EN-101).
*3 All chord types that can be fingered on the accompaniment
keyboard or “NonChord”. See “Fingering Guide” (page
A-1).
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “TrkEvent”, and then press [6]
(ENTER).
This displays “Trk Sy”
3.
Use bn [–] and [+] or the bl dial to specify the
event edit target track, and then press [6]
(ENTER).
This displays the [EVENT] indicator to the left of the
[EDIT] indicator.
• This displays the event at the beginning of the track.
4.
Use the [2] (w) and [5] (q) bm number keys to
display the event whose parameters you want
to change.
• Event location information (measure, beat, tick) is
shown on the right side of the display.
• Displaying a note event causes a confirmation tone
(the note of the note event) to sound.
• While editing the system track, one of the indicators
below will be displayed. The displayed indicator
indicates the part where the displayed event is
recorded.
5.
Depending on the event you are editing,
perform one of the procedures below.
• For information about event status indicators and how
to interpret indicators, see “Event Display” (page
EN-100).
• Pressing ck PLAY/STOP while editing an event will
play back the recorded data from the beginning of the
measure that includes the displayed event.
Event Setting Ranges
Event Parameter (Display) Settings
Notes Note Number (C1 to G9) 0 to 127
Velocity (Velocity) 1 to 127
Gate Time Beat (GateBeat) 0 to 340
Gate Time Tick (GateTick) 0 to 95
Tone
Number
Tone Number (Tone) 1 to 900
Rhythm
Number
Rhythm Number (Rhythm) *
1
Chord Chord type or “NonChord”*
2
*
3
Tone
Tone number Event name
Rh
y
th
m
Rhythm number Event name
Ab
M
7
Root Type
EOT
To edit an event
Part Display
UPPER 1
UPPER 2
LOWER 1
LOWER 2
Auto Harmonize
Phrase Pad 1 to 4 to
Displayed
Measure Beat
Tick
CT-X9000_8000IN_EN.book 101 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...