Loading ...
Loading ...
Loading ...
EN-45
Using Auto Accompaniment (Rhythm Mode)
There are two ways to change the tempo.
• Specifying a beats-per-minute value
• Tapping a beat with the dl TAP TEMPO button (tap input)
The current tempo value setting is always displayed in the
upper right corner of the display.
The tempo value is always shown in combination with a note
value. The example above indicates 120 quarter note beats
per minute.
1.
Change the note value as required.
• See “To change the displayed note value” below.
2.
Use the dk TEMPO [w] and [q] buttons to
change the tempo setting.
• The allowable tempo value setting range depends on
the currently displayed note value as shown in the
table below.
• When the note value is a quarter note, the tempo value
corresponds to the actual number of beats per minute.
When the note value is an eighth note the number of
beats per minute is twice that of the tempo value.
When the note value is a half note, the number of
beats is half that of the tempo value.
1.
Long-press dl TAP TEMPO until the
displayed note value changes.
• Each long-press of dl TAP TEMPO cycles through
the note value settings in the sequence shown below.
1.
Tap dl TAP TEMPO multiple times at as
steady a beat as possible.
This will set a tempo that is as close as possible to the
timing of the beat you tap.
• It helps to use this method to specify the approximate
tempo in combination with a procedure like the one
under “To specify a tempo value” (page EN-45).
• A tempo value that is input using this method has no
relation to the currently displayed note value. Depending on
the rhythm selected with the above operation, a quarter
note or eighth note tempo value is input.
You can configure settings to automatically start rhythm play
when you specify a tempo using the procedure under “To set
the tempo by tapping a beat” above.
To do so, perform the procedure under “To configure function
settings with the bk FUNCTION button” (page EN-107) and
enable the following setting: Other (Other) 3 Tap rhythm
start (Tap Rhy) (page EN-112).
Changing Auto Accompaniment
Speed (Tempo)
Note Value Indicator and Tempo Value
To specify a tempo value
Note Value Tempo Value Range
Quarter note (2) 20 to 255
Eighth note (6) 40 to 510
Half note (1) 10 to 128
Dotted quarter note (2.) 13 to 170
Note value Tempo value
TE
M
PO
Current setting value
To change the displayed note value
Quarter note (2) Eighth note (6)
Dotted quarter note (2.) Half note (1)
To set the tempo by tapping a beat
To start rhythm play with the dl TAP
TEMPO button
CT-X9000_8000IN_EN.book 45 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...