Loading ...
Loading ...
Loading ...
53
select the Bluetooth from the connection mode list. Pair the tool
with the V200 by tapping the device serial number on the screen.
3. When pairing is successful, the connection status will read,
“Paired.”
4. The current version of the VCI firmware will be displayed. Tap
Check for firmware updates to check if an update is available.
If an update is available, tap Get the new version to upgrade
the firmware or tap Cancel to exit the upgrade.
Upgrade via USB
➢ To upgrade the MaxiVCI V200 firmware via USB
1. Connect the V200 to the key tool using a USB-C cable.
2. On the MaxiIM Job Menu, tap Settings > VCI Manager and
select the Firmware Upgrade from the connection mode list.
3. The current version of the VCI firmware will be displayed. Tap
Check for firmware updates to check if an update is available.
If an update is available, tap Get the new version to upgrade
the firmware or tap Cancel to exit the upgrade.
10.4 System Settings
This function provides you with direct access to the System Settings screen,
where you can adjust various system settings for the tool, including wireless and
network settings, and various device settings such as sound, display, and
language settings.
10.5 Units
This option allows you to set the units of measurement system for the diagnostic
system.
➢ To set the units of measurement system
1. Tap the Settings application on the MaxiIM Job Menu.
2. Tap Units.
Loading ...
Loading ...
Loading ...