Loading ...
Loading ...
Loading ...
NOTE:
It is good practice to keep the ignition in the OFF posi-
tion while conducting Level 1 charging. This minimizes
any additional vehicle loads the Portable Charging
Cordset (EVSE) has to support. The additional electrical
loads will extend the high voltage battery charging time.
Troubleshooting Using The Status
Indicator Display
If the vehicle is not charging properly, consult the status
indicator lights.
The Green LED signals correct operation of the system.
The Red LED signals a failure in the charging system.
The Yellow LED signals a failure with the outlet.
Any faults in charging are displayed by the LEDs, either
steady or flashing, located on the status indicator dis-
play of the Portable Charging Cordset (EVSE). Refer to
the following troubleshooting table:
Portable Charging Cordset (EVSE) Charging System Failure Troubleshooting
Green LED Red LED Yellow LED Description Action/Consequences
OFF OFF OFF
Portable Charging Cordset (EVSE) not connected to the
domestic charging outlet or power failure in the domestic
power supply mains.
ON OFF OFF
There are no faults in the domestic power supply mains, so
the Portable Charging Cordset (EVSE) can be connected to
the charge inlet on the vehicle.
ON ON (Flashing) ON
Overheating at the charging outlet of the domestic power
supply mains.
When the normal temperature is reached, the system will
make a new charge attempt at a lower current level.
ON OFF ON (Flashing)
Charging to a lower current level due to overheating of the
charging outlet of the domestic power supply mains.
LED Indicator Lights
1—YellowLED
2 — Red LED
3 — Green LED
GETTING TO KNOW YOUR VEHICLE 21
2
Loading ...
Loading ...
Loading ...