Loading ...
Loading ...
Loading ...
4. Fill the vehicle with fuel, and when the fuel nozzle
“clicks” or shuts off, the fuel tank is full.
5. Keep the nozzle in the filler for five seconds after
nozzle clicks to allow fuel to drain from the nozzle.
6. Remove the fuel nozzle and close the fuel door.
NOTE:
In certain cold conditions, ice may prevent the fuel door
from opening. If this occurs, lightly push on the fuel
door to break the ice buildup and re-release the fuel
door using the inside release button. Do not pry on the
door.
WARNING!
•
Never have any smoking materials lit in or near the
vehicle when the fuel door is open or the tank is
being filled.
•
Never add fuel when the engine is running. This is
in violation of most state and federal fire regula-
tions and may cause the Malfunction Indicator
Light to turn on.
•
A fire may result if fuel is pumped into a portable
container that is inside of a vehicle. You could be
burned. Always place fuel containers on the
ground while filling.
Emergency Fuel Door Release
1. Access the rear quarter trim panel in the cargo area
on the right side of the vehicle.
2. Remove the release cap from the quarter trim
panel.
3. After removing the release cap, pull it directly away
from the quarter trim panel to release the fuel door.
4. Reinstall the release cap into the quarter trim when
completed.
REFUELING THE VEHICLE — PHEV
(IF EQUIPPED)
1. Put the vehicle in the PARK position.
2. Push the fuel filler door release button (located next
the headlight switch).
3. Pushing the button will initiate a sequence of events
to depressurize the fuel system. A message will dis-
play in the cluster when the vehicle is ready to be
fueled.
Release Cap Location
Fuel Door Emergency Release
Fuel Filler Door Release Switch
STARTING AND OPERATING 135
4
Loading ...
Loading ...
Loading ...