Loading ...
Loading ...
Loading ...
28
2. Control Unit — displays a selection menu for all available control units of the test
vehicle.
After a selection is made and the tablet establishes communication with the vehicle, the
corresponding function menu or selection menu will display.
4.5.1 Auto Scan
The Auto Scan function performs a comprehensive scanning over all the ECUs in the
vehicle to locate systems faults and retrieve DTCs. An example of Auto Scan interface
is pictured as below:
Figure 4-9 Auto Scan Screen
1. Navigation Bar
2. Main Section
3. Function Buttons
4.5.1.1 Navigation Bar
List Tab — displays the scanned data in list format.
Progress Bar — indicates the test progress.
4.5.1.2 Main Section
Column 1 — displays the sequence numbers.
Column 2 — displays the scanned systems.
Column 3 — displays the diagnostic indicators describing test results:
These indicators are defined as follows:
Loading ...
Loading ...
Loading ...