Loading ...
Loading ...
Loading ...
Checking the Charge Level
You can determine the watch’s current charge
level in any mode.
Charge
level
Indicator
Usable Functions
High
Low
All
All functions except those
that use GPS
Timekeeping only
(Button operations
disabled.)
●
When the battery indicator becomes
,
the message [CHARGE] will also appear on
the display.
●
The display goes blank when the battery
goes dead.
Important!
●
Charge the watch as soon as possible
after the battery indicator becomes
or lower. Leaving the watch without
charging for a number of months will
result in over-discharge, and may
make future charging impossible. If
this happens, contact your original
retailer.
Power Saving Function
Leaving the watch in a dark location in the
Timekeeping Mode for 70 minutes or longer
between the hours of 9 p.m. and 6 a.m. will
cause the watch to enter Level 1 power
saving. If the watch is left in this condition for
six or seven days, the watch will enter Level 2
power saving. The display of the watch goes
blank when the watch is in power saving.
Power Saving Level 1 :
The functions below can be used while the
watch is in Level 1 power saving.
●
Alarm
●
Timer
●
Phone connection
Power Saving Level 2 :
All functions disabled.
● Recovering from Power Saving
Use one of the operations below to exit power
saving.
●
Press any button.
●
Move the watch to a bright location.
●
Trigger auto light by angling the watch
towards your face.
Note
●
The watch will not enter power saving
in the cases below.
ー
During sensor measurement
operations in each mode, such as
when the barometric pressure
change indicator is enabled, etc.
ー
While any mode’s setting screen is
displayed
ー
While illumination is turned on
ー
While the battery indicator is or
lower
●
Note that the watch also may enter
power saving if its face is blocked from
light by your sleeve while you are
wearing it.
Pairing the Watch with a
Phone
To connect the watch with a phone, first install
the CASIO “G-SHOCK Connected” app on the
phone and then use Bluetooth to pair the
watch with the phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK Connected” app and
install it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “G-SHOCK Connected” icon.
3.
X
Hold down (C) for about 2.5 seconds
until [G-SHOCK] appears on the display.
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
●
Establishing a connection with a phone
causes the screen shown below to
appear on the watch.
Note
●
The first time you start up G-SHOCK
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Operation Guide 3452
7
Loading ...
Loading ...
Loading ...