Loading ...
Loading ...
Loading ...
While the details of a particular point are
displayed
1. Press (D).
This protects the displayed point.
A protected point is indicated by .
●
Press (D) again to unprotect.
2. Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
● To delete a registered point
1. While the menu of registered points or the
details of a particular registered point is
displayed, press (A).
Rotary Switch
2. Rotate the rotary switch to select a delete
method.
[ONE]: Deletes only the currently selected
point.
[ALL]: Deletes all points.
3. Press the rotary switch.
This deletes the point(s).
●
If you selected [ALL], press the rotary
switch again to delete. Delete will also
be executed automatically after about
10 seconds, even if you do not press the
rotary switch again.
4. Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
Setting a Registered Point as
the Destination
You can use the procedure below to specify a
registered point as a destination for a
navigation operation. If there is already a
destination specified and route navigation is
being performed, the operation below can be
used to set a new destination and start a new
route navigation operation.
1. If a navigation operation is in progress,
stop it.
l
Stopping Navigation
2. Press the rotary switch.
Rotary Switch
3. Rotate the rotary switch to move the
pointer to [SETTING].
4. Press the rotary switch.
5. Rotate the rotary switch to move the
pointer to [GOAL].
6. Press the rotary switch.
7. Rotate the rotary switch to move the
pointer to [POINT RECALL].
8. Press the rotary switch.
9. Rotate the rotary switch to move the
pointer to the point you want to specify as
your destination.
●
Selecting [RESET] deletes the currently
specified destination.
10. Press the rotary switch.
11. Rotate the rotary switch to move the
pointer to [YES].
12. Press the rotary switch.
The message [SETTING COMPLETED]
will appear after the destination is set.
After a few seconds, the GPS Navigation
Mode setting screen will re-appear.
13. Rotate the rotary switch to move the
pointer to [NAVIGATION].
14. Press the rotary switch.
This starts navigation.
Note
●
You can also use G-SHOCK
Connected to specify a destination.
Editing the Navigation Use
History
You can protect and delete navigation logs as
required.
1. If a navigation operation is in progress,
stop it.
l
Stopping Navigation
2. Press the rotary switch.
This displays the GPS Navigation Mode
setting screen.
Rotary Switch
3. Rotate the rotary switch to move the
pointer to [RECALL].
4. Press the rotary switch.
5. Rotate the rotary switch to move the
pointer to [ACTIVITY].
6. Press the rotary switch.
This displays a list of dates and times that
navigation was used.
● To protect a log
A recorded log that is protected cannot be
deleted.
1. Rotate the rotary switch to move the
pointer to the log you want to protect.
2. Press (D).
This protects the selected log.
A protected point is indicated by .
●
Press (D) again to unprotect.
3. Press (C) as many times as necessary to
return to the GPS Navigation Mode setting
screen.
Operation Guide 3452
16
Loading ...
Loading ...
Loading ...