Loading ...
Loading ...
Loading ...
Changing the Display Scale
The scale of the navigation screen can be
increased to show more details about a route,
and to determine the direction to a target point
from a start point or another point.
1. While a navigation operation is in
progress, press the rotary switch.
This enables adjustment of the scale.
Rotary Switch
2. Rotate the rotary switch to change the
scale.
●
The scale changes each time you rotate
the rotary switch. There are three scale
levels. Rotating the rotary switch further
displays the direction to a target point.
Navigation indicator of
point
Scale factor
Direction to target
point
Scale
Checking the Distance to Your
Destination
Each press of (A) cycles the display through
the linear distance from your current location
to preset points (start point, destination, etc.).
Navigation indicator of point
Linear distance
Note
●
The message [- - -.-km] will appear if
the current linear distance to the
destination is 1,000 km or greater.
Returning to a Start Point
(Backtrack)
At any time during a navigation operation, you
can reverse your route to navigate back to
your start point.
Destination
Start point
Start point
Current location
1. While a navigation operation is in
progress, press (D).
Rotary Switch
2. Rotate the rotary switch to move the
pointer to [BACKTRACK].
3. Press the rotary switch.
Pressing the rotary switch again or
allowing 10 seconds to elapse after step
3 will change to navigation with your start
point as your new destination.
●
To cancel the route reversal, press (C)
within 10 seconds after pressing the
rotary switch in step 3.
Stopping Navigation
1. While a navigation operation is in
progress, press (D).
Rotary Switch
2. Rotate the rotary switch to move the
pointer to [QUIT].
3. Press the rotary switch.
Pressing the rotary switch again or
allowing 10 seconds to elapse after step
3 will quit navigation and return to the
Timekeeping Mode.
●
To cancel the navigation quit operation,
press (C) within 10 seconds after
pressing the rotary switch in step 3.
Deleting a Destination
Deleting the destination will stop route
guidance, but continue route recording.
●
For information about setting a destination,
refer to the information below.
l
Setting a Registered Point as the
Destination
1. While a navigation operation is in
progress, press (D).
Rotary Switch
2. Rotate the rotary switch to move the
pointer to [RESET GOAL].
3. Press the rotary switch.
This deletes the destination and returns to
the navigation screen.
Note
●
Backtrack cannot be used to clear a
destination while a navigation
operation is in progress.
l
Returning to a Start Point
(Backtrack)
Registering Your Current
Location
You can use the procedure below to record
your current location in Point Memory. A point
recorded in Point Memory can be specified as
the destination for future navigation
operations.
●
Point Memory can store up to 60 points.
1. While a navigation operation is in
progress, hold down the rotary switch for
about one second.
After you record your location, the display
will momentarily shows its latitude and
longitude, and other information. After a
few seconds, the message [SET ICON?]
will appear.
Operation Guide 3452
14
Loading ...
Loading ...
Loading ...