Loading ...
Loading ...
Loading ...
Using Navigation
Starting Navigation
Holding down the rotary switch for about one
second starts a GPS positioning operation.
After startup of the positioning operation is
complete, and then the navigation screen
will appear.
Positioning complete
Positioning in progress
Important!
●
Use navigation outdoors where the sky
is visible and not blocked by buildings,
trees, or other objects. For information
about suitable locations for receipt of
GPS signals, go to the section below.
l
Appropriate Signal Reception
Location
●
Keep the watch LCD pointed upwards
until startup of the positioning
operation is complete and the
navigation screen appears.
Note
●
You can also perform the steps below
to display the navigation screen.
A
Press the rotary switch.
This displays the GPS Navigation
Mode setting screen.
B
Rotate the rotary switch to move the
pointer to [NAVIGATION].
C
Press the rotary switch.
This starts route recording and
navigation.
Rotary Switch
●
The message [DATA FULL] will
appear when remaining memory
capacity is low. Pressing the rotary
switch will start navigation, and
overwrite the oldest log in memory. If
you want to delete a different log or if
all logs are protected, press (C) to stop
navigation and then delete the desired
data.
l
Editing the Navigation Use History
●
If memory becomes full or if the
allowable continuous measurement
time is exceeded while a navigation
operation is in progress, navigation will
stop and the watch will return to the
Timekeeping Mode.
● Interpreting GPS Navigation
Information
①
②
③
④
⑤
⑥
⑦
A Memory usage
UnusedUsed
B Actual route
C Scale
D Log acquisition status
: Log information being acquired
: Log information not being acquired
E Navigation indicators
: Current location
S
: Start point
G
: Destination (Goal)
*
1
to
9
: Waypoints
*
F Route to destination
*
G Elapsed time
* Displayed only when a destination and
waypoints are specified.
Note
●
Waypoints and a route can be
specified using G-SHOCK Connected
only.
●
You can estimate approximately how
much longer navigation functions can
be used based on memory usage and
elapsed time.
Operation Guide 3452
13
Loading ...
Loading ...
Loading ...