Loading ...
Loading ...
Loading ...
TOOL USE AND CARE SAFETY
Z_ WARNING: BE SURE to read and understand all Instructions before
operating this dri!lldrIver. Failure to follow al! instructions listed below may result
in electric shock, fire and/or serious personal injury.
t. ALWAYS use clamps or other practical ways to secure and support the workplece
to a stable platform. Holding the work by hand or against your body ts unstable and
may feed to loss of control.
2 DO NOT force the tool Use the correct tool and accessory bit for your appt_catlono
The correct tool and bit will do the job better and safer at the rate for which it is designed,,
3_ DO NOT use the tool if trigger switch does not turn it "On" or "Off". Any tool that
cannot be controlled with the trigger switch is dangerous and must be repaired°
4. REMOVE the battery pack from the drill/driver or place the forward/reverse
selector switch with power lock.off in the "Lock Off" position before making
any adjustments, changing accessories or storing the toot. Such preventive
safety measures reduce the risk o! starling the too{ accidenlaUy,,
5 STORE idle tools out of the reach of children and other untrained persons,,
Tools are dangerous tn the hands of untrained users,
6 ALWAYS remove battery pack and store separately when drill/driver
Is not being used.
7 When battery pack Is not In use, keep It away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to the other. Shelling the battery terminals
together may cause bums to skin, sparks or a fire,
8. MAINTAIN tools with care. Keep cutting tools such as twist drill bits sharp and
clean. Properly maintained tools with sharp cutting edges are less likely to b_nd and are
easier to use and control
9 CHECK for mteatignment or binding of moving parts, breakage of parts, and any
olher condition that may affecl the tool's operatiom It damaged, have the fool serviced
bolero using., Many accidents are caused by poorfy maintained tools
10. USE ONLY accessories that are recommended for this tool. Accessories that may
be suitable for one tool may become hazardous when used on another tool.,
Sea page 24 for accessories.
t t Keep the too! and its handle dry, clean and free from oil and grease. Always use
a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool. Fol!owtng Ibis lute will reduce
the risk of !ass of centre! and deterioration o{ the plaslic enclosure el the drill / driver,,
7-11-07
Loading ...
Loading ...
Loading ...