Loading ...
Loading ...
Loading ...
T
FORWARD / REVERSE SELECTOR SWITCH with POWER LOCK-OFF
(Fig, 2, 2a, 2b)
Fig, 2
FORWARD
Fig° 2a
REVERSE
Fig_ 2b
POWER LOCK-OFF
The direction of bit rotation is !orward or reverse and is controlted by a selector switch
Iocated above and to the rear of the trigger switch., When holding the dri|tlddver in the
normal operating position, (and viewed from the back of the driiI!driver see Figs, 2, 2a
and 2b), the selector switch should be posilioned (pushed) a_lthe way 1o the LEFT,
for FORWARD or normal drilling I driving, and positioned (pushed) all the way to the
RIGHT for REVERSE to remove ddll bits alld back out screws°
The third position for lhs selector switch is lccaled in the CENTER (Fig, 2b) This position keeps
lhe trigger swilch Item working, locking the power"OFF Selling the selector switch in the "OFF
or CENTER position helps reduce Ihe possibility of accidental starling when the tool is nol in use,
l Z_ CAUTION: To prevent gear damage, ekvays altow the chuck to come to a ]complele stop before changing the direction of rotation.
REMOVE BATTERY PACK FROM
DRILL / DRIVER (Fig, 3)
1, Place the Forward / Reverse Selector Switch
with Power Lock-Off into thecenter posttionto
lock the power off (see Fig,2, above),,
2 Locate the latches on each s_deof tile batlary
peck,,Depress (squeeze in) latches and pull
battery pack out o! drill,
14
Loading ...
Loading ...
Loading ...