Loading ...
Loading ...
Loading ...
You can easily reset all settings to the
default factory settings.
-
E
nsure the machine is plugged in and
switched on at the power outlet.
- Press and hold the MANUAL button.
- While pressing the MANUAL button, press
the STANDBY button.
- The machine will beep 4 times and will
automatically power on.
23
Customisable – steam pump rate
Restore all default settings
- P
ress and release one of the buttons
depending on the required steam
temperature setting:
-10°C: press the STANDBY button.
-5°C: press the MANUAL button.
+5°C: press the 2 CUP button.
+10°C: press the PROGRAM button.
-
When the new temperature setting has been
selected, the machine will beep twice.
-
The machine will then automatically power
on.
Steam pump rate
The steam pump rate of this machine has
been set at 0.3 seconds on and 0.5 seconds off.
Adjusting the steam pump rate allows you to
make the steam wetter or dryer and aids in the
delivery of a powerful and constant dry steam.
A dry steam is ideal for milk texturing. The
steam rate can be modified in increments of
plus or minus 0.1 seconds.
Adjusting steam pump rate
- Ensure the machine is plugged in and
switched on at the power outlet.
-
Press and hold the PROGRAM button.
-
While holding the PROGRAM button, press
the
STANDBY button and then release
PROGRAM button.
To indicate you have activated the steam pump
rate mode, a light on one of the buttons will
illuminate.
This light will remain on for up to 5 seconds
before automatically returning to factory
settings if no action is taken. The machine will
then power on.
-
Press and release one of the buttons
depending on the required steam
temperature setting:
+0.2 sec: press the STANDBY button.
+0.1 sec: press the MANUAL button.
-0.1 sec: press the 2 CUP button.
-0.2 sec: press the PROGRAM button.
-
When the new steam pump rate setting has
been selected, the machine will beep twice.
-
The machine will then automatically power
on.
Note:
Do not press the STANDY button.
Note:
Do not press the STANDY button.
Loading ...
Loading ...
Loading ...