Loading ...
Loading ...
Loading ...
Placesmallerunridgedendofwand,
intobottomof rack.Snapwandinto
clip. Repeatwithotherwand.
Opentoolcover.
Cleaner description
Insert ends of dusting brush (A),
crevice tool (B) into storage areas.
Secure furniture nozzle (C) in clip.
Close tool cover.
ii
Remove switch lock (A) above ON/
OFF switch (B) by pulling it straight
out. Dispose of switch lock.
If switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plug-
ging cord into electrical outlet.
1 / 2
12\
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord
around hooks for storage.
The top hook can be
rotated right or left
for easy cord release.
4. Hose
5. Tool cover
6. Dusting brush
7. Furniture nozzle
8. Crevice tool
9. Carrying handle
10. Wands
11. Final filter door
12. Handle release lever:
step on lever to lower
handle to operating or low
positions.
13. Edge groomers
14. Furniture guard: helps
prevent cleaner frorrl
marking furniture.
15. Nozzle control knob: slide
knob to correct setting for
height of carpet being
cleaned.
16. Headlight*
17. Embedded Dirt FINDER TM
sensitivity switch*
18. 'Dirt FINDER' display*
19. Check bag indicator
20. Stair cleaning handle:
located below lower edge of
door.
21. Bag door
22. Cord clip
23. Hose rack
*some models only
The assembled cleaner will look
like the drawing.
Operate cleaner only at
voltage specified on data
plate on bottom of
cleaner.
This cleaner is intended for
household use.
Polarized plug
Toreduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
ON-OFF Switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch down.
m
\
Loading ...
Loading ...
Loading ...