Loading ...
Loading ...
Loading ...
Removebagdooroncleanerbody
bypushingdownat topofdoorand
pullingdooroutward.
Switch (A) above bag door should
be in OFF position.
While holding rack in place, slide
handle onto cleaner body.
Make sure tab is inserted fully into
slot.
I
Push bolts into holes on back of
handle.
Place nuts in recessed areas on front
of handle, Hold each nut in place
while tightening each bolt securely
with a Phillips screw driver.
Reposition bag door by fitting tabs
on bottom of door into opening,
Press top of door to snap securely
shut.
Press cord into the 3 notches and
the clip as shown,
NOTE Hose must be connected as shown for all
operations.
Align end of hose with projections (A)
over slots (B) in dirt duct.
Slide hose into (B) and twist hose to
lock it into place.
Lift hose tube cover (C)
Position hose over rack and into hose
tube (D) or (E) (depending on your
model).
Loading ...
Loading ...
Loading ...